A table saw is a fine tool that could help you do the best DIY projects. It will help you get the right cut with sharp edges on the wood material. However, we know every piece of equipment needs maintenance from time to time; otherwise, it loses the spark.
In the case of the table saw, it could make unnecessary or annoying noises for different reasons. If the motor is working fine, you should know that the blade is the cause of the noise. It is a sign that the Table saw needs attention in the form of lubricant on the gears under the saw.
Safety Measure to Follow
First of all, you must get serious about the risk of loud noise that your Table saw starts making. You shouldn’t delay the action to get rid of it. However, staying on the safe side is always a good plan. You must wear protective gear to save yourself from hearing damage. I hope you know that the Table saw can get loud as 120 dB, and the eardrum burst can occur at 150 dB. It is as likely taking a huge risk which you can lower by taking safety measures.
Annoying Noise of the Table Saw
You must want to get rid of the noise as it does nothing but gives you a challenging time working. Whenever you adjust the blade, it sounds like the Table saw squeals like nails on the board. Somehow it makes sense, and the stiff blade has a right to make noise compared to the clean blade. Thus, the easy way to deal with the situation is using a lubricant whenever you get this noise.
Moreover, when the machine runs for a long time, there is a possibility that the original lubricant of the gears gets hard or even wort out, and this is the reason the bare steel on the gears is making an annoying noise. If you do not treat the gears with lubricant, the noise may get worse with time.
Use the Lubricant
Now, the point is what kind of lubricant would work with the Table saw. Since it is a powerful machine and the situation involves the gears. It needs a particular sort of lubricant that stays with gears for a significant time. So, lithium grease is the one that professionals use in factories. It is always their priority, so I assume the formula work as wonders for the Table saw. Alternatively, the most common type of lubricant is Powdered graphite. You can also use it to deal with the situation, and it should be available at any hardware store.
Both lubricants must have something unique to offer. However, I Find the powdered graphite better than the grease because the grease attracts dust and chips, making it harder again in no time.
The easy yet professional way to apply the lubricant on the gears involves few steps. First, clean the gears using WD-40 and with a small brush. This way, the dust will remove and help the grease/lubricant gets soften. Now it is ready to apply a new lubricant, but do not get hard with it. Apply a thin layer of grease and let it absorb by turn the levers a few moves.
Special Blades for the Table saw
It is the modern era where you can get the things you can dream of. If you are likely to spend time with the Table saw and irritates your family with the loud noise, then you must buy the special blades that are quieter than the regular ones. These blades are pretty sharp and built for those who have to work with the Table saw regularly and face the risk of hearing damage.
Adjust the Blade Height
Another easy way to silence a squeaky chair is by adjusting the height of the blade. Make sure the blade should be a little higher than your wood material. It may help to reduce the harsh sound of the Table saw.
Blade Stabilizer
If you are not planning to get a new sharp blade, then try using a blade stabilizer. It is an excellent tool to reduce the noise by around 2db. According to your Table saw model, ensure to get the right side of the stabilizer as it stabilizes the blade, resulting in less vibration, eventually producing low noise.
Be Gentle with the Material
What if the blades are not the actual cause of the shrill sound? Try to get a little gentle with the Table saw and the wood material. If the wood is thick, do not cut it with one pass for the sake of saving time. It will merely make an unnecessary loud noise. Try to cut the thick wood slowly yet steady. Hence, it is better to cut the wood in several passes to get the desired result without getting loud.
Conclusion
Working with the Table saw is not a complex task, but bearing its loud annoying noise gets unbearable after a considerable time. Besides, it can get dangerous as the extent of noise it produces. After following all the safety precautions, it is better to go in-depth about the cause and deal with it.
There are several possibilities of the Table saw producing noise, including the motor and blade issues. If the motor is the culprit, you will feel that your Table saw is vibrating too much that it starts producing sound. So, it’s time to insulate the base using Rubber pads or insulation mounts. Whereas if the blade makes problems for you, then there are few alternatives to try and get rid of the noise.
This article contains few options to consider reducing the blades’ loud noise with the solutions you can ponder. I hope the article helps you to silence a squeaky table saw.
Leave a Reply